TACO 1/2" 006 BC4-TAC Circulator Pump/ Timer /Aquastat

TACO 1/2" 006 BC4-TAC Circulator Pump/ Timer /Aquastat The TACO 1/2" 006 BC4-TAC Circulator Pump/ Timer /Aquastat combination is designed to cycle the circulator during peak demand periods. The clock timer is adjustable to 15-minute intervals within a 24-hour time frame. The Temperature Aquastat automatically switches the circulator ON at 95F and OFF at 115F. The two can be used in combination, or they can be used separately. When the Clock Timer/Temperature Aquastat are used together, the Timer switches ON sending power to the unit. The Temperature Aquastat measures the temperature, and cycles the circulator as long as the Timer is switched to the ON mode. If used separately, the Analog 24 Hour Clock timer operates the circulator during the chosen number of 15-minute intervals. When using only the Temperature Aquastat, the circulator cycles continuously to maintain a temperature between 95F and 115F. The Clock Timer and Temperature Aquastat are retro-fittable to any "00" Series Circulator. This user-friendly clock has an hour hand, raised minute hand for ease of adjustment, two directional arrows, and AM/PM time settings. The Clock Timer can be mounted in any direction, by just attaching it to the capacitor box electrical connection hole. One Aquastat fits both 3/4" and 1/2" pipe applications. The Aquastat snaps directly onto 3/4" pipe and, for 1/2" applications, it snaps directly onto the discharge of the 1/2" bronze body. TACO 1/2" 006 BC4-TAC Circulator Pump/ Timer /Aquastat Features: PUMP: • Standard High Capacity Output-Compact Design • Quiet, Efficient Operation • Direct Drive-Low Power Consumption • Unique Replaceable Cartridge Design-Field Serviceable • Self Lubricating • No Mechanical Seal • Unmatched Reliability-Maintenance Free • Casing (Volute): Bronze • Stator Housing: Steel • Cartridge: Stainless Steel • Impeller: Non-Metallic • Shaft: Ceramic • Bearings: Carbon • O-Ring & Gaskets: EPDM • Motor: Permanent Split Capacitor Impedance Protected • Volts: 115 • HZ. 60 • Phase: 1 • Amps: 0.52 • RPM: 3250 • HP: 1/40 • BC = Bronze, Sweat, Panel Mount Tapings • Bronze Construction with 1/2" sweat connections • Flow Range: 0 - 10 GPM • Head Range: 0 - 9 Feet TIMER: • 24 Hour Analog Clock Timer • Electrical Characteristics: 115/60/1 • Timer Switch: 16A @ 115V • Timer Interval: 15 Minutes • Clock Face: Hour & Minute Hands • Manual Switch: • I -Permanently ON • L -Automatic • O -Permanently Off TEMPERATURE AQUASTAT: • Snap Action Temperature Switch • Electrical Characteristics: 115/60/1 • Connections: Zx" (Snap On Circ. Body) Cv" Copper Pipe • Temperature Setting: ON @ 95F OFF @ 115F • Contacts: 7 amp SPDT Switch • Wire Leads: 12"-Type 18-2 Round Premium Cable