Growing Results Growing Results USA United Kingdom Canada Australia
Custom Search

The Eastwood Company: Hotcoat Powder Coating


Articles 1 to 12:


EW Begining Powder Coater's Handbook
Beginning Powder Coater's Handbook - Want to learn more about Powder Coating or improve your technique? Here's a great place to start. This book focuses on the HotCoat Line of Powder coating guns and equipment. Written with the first time powder coater [... more]
$29.99
The Eastwood Company

HCP 39 X 39 X 40 Oven Stand
HCP 39 X 39 X 40 Oven Stand [... more]
$499.00
The Eastwood Company

Hotcoat Powder Cast Iron 5 lb
All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. cans. Buy 3 or more, mix and match, any standard [... more]
$69.98
The Eastwood Company

EW Pre Painting Prep Aerosol 11oz
Proper surface preparation is one of the most important factors in achieving a quality finish. This specially formulated PRE Painting Prep removes dirt, wax, polish, grease, silicone, buffing compound, even road tar - ensuring a clean surface. Very easy [... more]
$11.99
The Eastwood Company

Hotcoat Powder Mirror Blue 8 oz
All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. bottles. [... more]
$8.99
The Eastwood Company

Hotcoat Cobalt Blue Powder 5lbs
All HotCoat Powders are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. This TGIC Polyester is cured at 400 degrees F for 20 minutes after flow-out (transitions form a dry powder to liquid look) occurs. [... more]
$124.99
The Eastwood Company

Hotcoat Powder Cadillac Blue 5 lb
All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. cans. Buy 3 or more, mix and match, any standard [... more]
$49.99
The Eastwood Company

EW Dekote Paint Stripper 5 Gallon
Safer Stripper - Want to get away from Methylene Chloride and still remove tough urethane, epoxy and powder coatings? Then Eastwood DEKOTE is the answer. Available in aerosol, qt., gal, 5 and 55 gallon drums this paint remover will not harm steel, [... more]
$199.99
The Eastwood Company

Hot Coat Bronze Powder 2LBS
Hot Coat Bronze Powder - This powder cures to a medium tan with random gold sparkle. Produces a smooth finish with slight orange peel. Cure at 400 degrees F for 20 minutes after flow out occurs (transitions from a dry powder to a liquid look). [... more]
$25.99
The Eastwood Company

EW Dekote Paint Stripper 1 Qt
Safer Stripper - Want to get away from Methylene Chloride and still remove tough urethane, epoxy and powder coatings? Then Eastwood DEKOTE is the answer. Available in aerosol, qt., gal, 5 and 55 gallon drums this paint remover will not harm steel, [... more]
$16.98
The Eastwood Company

High Temp Silicone Caps 0.234" 10/pack
Silicone Caps - This pack of 10 silicone caps have a 15/64"ID (.234"). [... more]
$3.99
The Eastwood Company

Ir Cure System With Deluxe Hotcoat Gun
This complete innovative system allows you to powder coating small parts instead of painting. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor). Use in a clean, dry, well ventilated work area! [... more]
$529.99
The Eastwood Company


Information provided in association with The Eastwood Company.
Prices are intended as a guide only, and are subject to change.
To confirm pricing and availability, click through to the merchant.
SITE SEARCH
 


SUBSCRIBE RSS Feed
Add to My Yahoo!
Add to Google
Add to MSN
Add to Newsgator
Add to Bloglines

Copyright © 1999-2009 Data Growth Pty Ltd. All rights reserved.
Privacy Policy | Terms of Use |