Round Hole Punches Set Of Ten
 The quickest, easiest way to put large, burr-free holes in sheet metal (up to 16 gauge). Just drill a starting hole, insert punch, then thread die on opposite side and turn with Allen wrench (not included). Made in England with heat treated steel. [... more]
$78.88 - $149.99
The Eastwood Company |
Round Hole Punches Set Of Four
The quickest, easiest way to put large, burr-free holes in sheet metal (up to 16 gauge). Just drill a starting hole, insert punch, then thread die on opposite side and turn with allen wrench (not included). Made in England with heat treated steel. [... more]
$59.99
The Eastwood Company |
3-1/8" Head Offset Head Seamer padded handle 8"OAL
Hand Held Bending Brake - Shape patch panels on site. Accurately create bends and professional looking folds in up to 22 gauge steel or 24 gauge stainless steel. Perfect for creating patch panels for door edges of rocker panels, etc. Assembled with high [... more]
$54.99
The Eastwood Company |
Precision Tubing Notcher
Strongest tubing joints depend on precisely cut tubing. Trying to fill a poor joint with a thick weld bead not only looks bad, but can lead to disastrous joint failure. These tubing notchers can help make tight, precise joints in tubing up to 2" in [... more]
$329.99
The Eastwood Company |
Pre-cut.063" alum. 6-gauge universal dash panel
This dash is a universal hot rod dash. Pattern uses 1/2" swirl on.063" aluminum. Center speedometer hole 3 3/8" and tachometer hole 3 3/8" with four holes 2 1/16" for additional gauges. Size approximately 5 1/4" tall and 21& [... more]
$109.99
The Eastwood Company |
Panelbeater Sandbag And Teardrop Mallet Kit
Supports sheet metal yet 'gives' under mallet blows to allow the metal to stretch into shape. Used to form deep shapes in metal without nicks or gouges. Heavy weight cowhide, bound with adhesive and double stitching. Full 18" square. Fill with dry [... more]
$64.98
The Eastwood Company |
Roll Set - Full Radius TankRolls Delrin 5/32" Rad.
This bead roll set is designed to work with any of the power driven bead rollers, and is exactingly machined from high strength plastic (Delrin). This roll set is considered to be a Full Tank Roll design with a 5/32" radius. Made in USA. Bead Rolls [... more]
$59.99
The Eastwood Company |
EW Teardrop Mallet 23/4in Diameter
Eastwood's yellow ultra-high-molecular-weight plastic mallets stretch and form sheet metal. Screw secured head captures handle within for proper fit and allow the head top to be used for forming. Made in the USA. [... more]
$32.99
The Eastwood Company |
Roll Set - 3/16" Standard Round - Steel
This bead roll set is designed to work with any of the power driven bead rollers, and is exactingly machined from heat treated steel. This roll set is considered to be a 3/16" Standard Round Roll Set. Made in USA. Bead Rolls measure 2-1/2" OD x [... more]
$59.99
The Eastwood Company |
Engine turned sheet S.S. 12x48.030 1/2 In.Swirl
Now you can customize your ride or your shop w/ style in minutes w/ these pre-machined sheets of.063" Aluminum or.030" Stainless Steel. Available in a variety of sizes ranging from 6"x12" to 36"x48" w/ turning diameters of: [... more]
$419.99
The Eastwood Company |
Engine turned sheet Alum. 24x36.063 3/4 In.Swirl
Now you can customize your ride or your shop w/ style in minutes w/ these pre-machined sheets of.063" Aluminum or.030" Stainless Steel. Available in a variety of sizes ranging from 6"x12" to 36"x48" w/ turning diameters of: [... more]
$274.99
The Eastwood Company |
Metal Fabricators Handbook
Carefully chosen for clarity and content, this book is an invaluable resource for anyone doing metalwork, from the beginner to the expert. Generously illustrated. Step-by-step sequences, with great photos, on fabricating hood scoops, fenders, fuel tanks, [... more]
$18.95
The Eastwood Company |
Information provided in association with The Eastwood Company.
Prices are intended as a guide only, and are subject to change.
To confirm pricing and availability, click through to the merchant.
