How to Make a Hand Spindle
You can make a simple spindle using recycled compact disks, a grommet, a small eyehook and a wooden dowel. Sand the ends of the dowel so they're smooth and have no burrs. On one end of the dowel, mark the center with a pencil. Wearing safety ... [... more]
DIYnet |
Conditioning Your Hand Cards - Spinning
While we expect new equipment to work well right away, this is not always the case with a new pair of hand cards. The wire teeth of the carding cloth may have tiny burrs on the cut ends of the wire and these little burrs will catch the wool ... [... more]
Bella Online |
How to Use a File
Files are designed to smooth wood, metal and plastic. You can remove burrs from corners and sharpen metal edges with one as well. A file cuts only on the push stroke and leaves marks on the surfaces that must later be smoothed with ... [... more]
eHow |
How to Sharpen a Chisel
Check the beveled edge with a magnifying glass for burrs and nicks. Grind them off with a medium grit wheel on your bench grinder. Wipe the bevel clean about every third stroke with a clean rag and re-oil the stone. Sharpen your chisel often for ... [... more]
eHow |
Deburring and More Welding
The barstool cut parts are deburred and the frames are welded together. In this segment host Amy Devers demonstrates how to grind off the burrs that were created after welding the frame and seat tabs, and then she welds the frame together using a ... [... more]
DIYnet |
Interstate 3/4x1x1/4shk Snglcut Tree Rad End Carbide Burr
Features: Length of Cut: 1. Shank Style: Steel. Shape: F - Tree Radius End. Style: SF7. Cutting Diameter (inch): 3/4. Material: Solid Carbide. Overall Length (inch): 2-3/4. Shank Diameter (inch): 1/4. WWW Cutting Diameter: .7500", 3/4". [... more]
Amazon.com |
How to Build Pinewood Derby Cars
Check the wheels - they should be perfectly round. Put a wheel on an axle and spin it. You can't fix wiggly wheels. Replace them now if they aren't perfect. Check the wheels and axles for burrs. Remove them with nail clippers or fine ... [... more]
eHow |
Refinishing School
Make overlapping passes using a 16-in. floor polisher outfitted with 60-, 80-, 100-, and 120-grit screening. Screen edges by hand with a palm sander fitted with 100-grit sandpaper. Use grit sandpaper to take the rough burrs off a screening disk ... [... more]
This Old House |
Interstate 1/4x5/16x1/4 Snglcut Inverted Cone Carb Burr
Features: Length of Cut: 5/16. Shank Style: Steel. Shape: N - 10º Taper Inverted Cone. Style: SN1. Cutting Diameter (inch): 1/4. Material: Solid Carbide. Overall Length (inch): 2. Shank Diameter (inch): 1/4. WWW Cutting Diameter: .2500", 1/4& [... more]
Amazon.com |
Interstate 3/8x1-1/16x1/4 Dblcut Tpr Rad End Carbide Burr
Features: Length of Cut: 1-1/16. Shank Style: Steel. Shape: L - 14º Taper / Cone Radius End. Style: SL3L6. Cutting Diameter (inch): 3/8. Material: Solid Carbide. Overall Length (inch): 6. Shank Diameter (inch): 1/4. Binding: Misc. EAN: 0691781167787 [... more]
Amazon.com |
Interstate 3/16x1/4shk Snglcut Ball Carbide Burr
Features: Length of Cut: 1/8. Shank Style: Steel. Shape: D - Ball. Style: SD14. Cutting Diameter (inch): 3/16. Material: Solid Carbide. Overall Length (inch): 2. Shank Diameter (inch): 1/4. WWW Cutting Diameter: .1875", 3/16". Binding: Misc. [... more]
Amazon.com |
Interstate .3/8x3/4x1/4shk Snglcu Tree Rad End Carbide Burr
Features: Length of Cut: 3/4. Shank Style: Steel. Shape: F - Tree Radius End. Style: SF3. Cutting Diameter (inch): 3/8. Material: Solid Carbide. Overall Length (inch): 2-1/2. Shank Diameter (inch): 1/4. WWW Cutting Diameter: .3750", 3/8". [... more]
Amazon.com |
